您当前的位置: 首页 > 网页快照
Ultralight Gold Foam Shimmers in the Limelight
home. / news. / ultralight gold foam shimmers in the limelight. Ultralight Gold Foam Shimmers in the Limelight. December 2, 2019 Ultralight gold, copper, and silver foams are lighter than a parakeet feather. Illustration by Amy Henke Lawrence Livermore National Laboratory (LLNL) scientists have created the lightest gold foam to date. The new form of ultralight gold aerogel foam will be used for targets for the National Ignition Facility (NIF), the largest and most energetic laser in the world, but also has wider applications in electronics, catalysis, sensors, and energy conversion and storage. The research appears in the journal Nano Letters and was selected for a supplementary journal cover. Aerogels are materials that are lightweight, have a high surface area, and are made up of a nanoporous network with densities between 1 and 1,000 milligrams per cubic centimeter. A wide range of metals and metal alloys have been made into ultralight, monolithic foams, including nickel, cobalt, copper, and silver. The synthesis of ultralight gold aerogel foams has remained elusive, however. Ultralow-density gold foams with microscopically uniform pores are uniquely suited as targets for ultrabright x-ray sources and for studying high energy density physics at high-power laser facilities. This impactful work demonstrates the lightest gold foam in the world. The cover of Nano Letters shows how the gold aerogels are so light that they can be carried on the back of a mosquito. Cover image photo by Joshua DeOtte/LLNL “These gold aerogels were so light that they can be carried on the back of fragile insects or even blown away by gentle breath, which used to be a big technical challenge in the experiments,” said LLNL material scientist Fang Qian, lead author of the paper. “We have created new approaches to prepare high-quality gold nanowires in large quantities to ensure sufficient material supply for the foam fabrication, with densities tuned in a predictable manner,” she said. “Density tunability is important because key physical properties of metal foams — such as stiffness, strength, electrical conductivity, thermal conductivity, and x-ray opacity — scale with density.” The team created the ultralight gold foam by starting with gold nanowires of uniform size with ultrathin diameters and high purity and high aspect ratios. The team members then freeze-cast the nanowires to produce free-standing aerogels with densities down to 6 milligrams per cubic centimeter. Successful fabrication of metallic nanowire-based foams starts with the synthesis of high-quality nanowire feedstocks (see Making Metal with the Lightness of Air). “Our team has been working on synthesis of metallic nanowires for a number of years, with emphasis on producing high-quality nanowires at scale, necessary to produce high-quality metallic aerogels,” said LLNL materials scientist Yong Han, a co-author of the paper. “Developing robust processes to reproducibly synthesize high-quality metallic nanowires is a major challenge our team has been working on. We continue to innovate our processes to deliver high-quality materials to meet the demands of our Lab’s missions.” “Producing millimeter-scale gold aerogels at this low density was quite unexpected and underscores the opportunities presented by freeze-casting metal nanowire solutions,” said LLNL materials scientist Michael Bagge-Hansen, the project’s principal investigator and a co-author of the paper. “I am enthused with the positive impact of this work — it really adds another capability to our toolbox." In addition to making gold nanowires, the team has begun unraveling the complex science of freeze-drying to control the structure, uniformity, and robustness of the resulting gold foams. To transition research from the lab to the field, the metal foams need to be robust. “These gold foams are mechanically stable compared to early samples that were similar in strength to a long cigarette ash,” said Brent Blue, director of NIF’s National Security Applications Program. “They can be squeezed or dropped, and they bounce back and hold their shape very well, which is a critical quality for use as a bright x-ray source. This is an amazing feat given that even though they look solid, they are 99.9 percent void, or 0.1 percent solid.” Other LLNL researchers include Alyssa Troksa, Tyler Fears, Michael Nielsen, Art Nelson, Theodore Baumann, and Sergei Kucheyev. The research was funded through LLNL’s Laboratory Research and Development program. —Anne M. Stark Follow us on Twitter: @lasers_llnl.
From: