New! Sign up for our free email newsletter.
Science News
from research organizations

How long can fiber reinforced polymer sustain concrete structures? Scientists answer

Date:
October 14, 2021
Source:
National Korea Maritime and Ocean University
Summary:
One potential cost-effective way to sustain ageing concrete subjected to harsh environmental conditions is to externally coat the material with fiber reinforced polymer composites. But few studies have looked at the durability of such strengthening. Now, researchers from Korea and the USA conduct a 13-year long experiment to find out.
Share:
FULL STORY

In modern society, we find that the majority of our infrastructure (buildings, bridges, tunnels, etc.) is made of ageing concrete. A recently developed cost-effective method of sustaining this infrastructure is external coating with fiber reinforced polymer (FRP) composites. But is this a temporary patch or a durable solution? Not much research has looked into this question. Now, a 13-year-long study published in Composites Part B finally finds out, taking us one step closer to the wide-spread utilization of this solution.

In the FRP-strengthening of concrete, glass or carbon fiber reinforced polymer (GFRP or CFRP) composites are bonded onto concrete using an epoxy adhesive. These sheets provide additional support and strengthen the concrete structures by protecting them from harsh environmental conditions, such as high moisture levels and temperatures. But the problem is, these same environmental conditions can potentially degrade the concrete-FRP bond as well, causing the FRP protection system to fail prematurely.

Prof. Jaeha Lee from Korea Maritime and Ocean University, a lead researcher in the 13-year study, says, "The information available on FRP-concrete bond behavior following sustained loads in different environments is very limited, particularly for periods beyond two years."

The researchers tested both CFRP and GFRP systems under various indoor and outdoor environmental conditions for change in a parameter called the debond onset strain. This is a measure of the deformation that occurs before failure; larger strains are usually preferred to forewarn failure.

The researchers found that environmental conditions had a significant impact on bond behavior. At the end of 13 years, larger reductions in debond strains were observed in outdoor beams than indoor beams. Further, the bond behavior varied between materials: changes in debond strain were negligible in indoor CFRP beams, while in indoor GFRP beams, there was a notable decrease.

Prof. Lee stresses the importance of such tests for future use stating: "If the long-term durability of concrete-FRP interfaces is evaluated, the use of this strengthening system is expected to increase with minimum investment. This will be great for affordably maintaining a safer city by minimizing the risk of collapse or damage of existing structures."


Story Source:

Materials provided by National Korea Maritime and Ocean University. Note: Content may be edited for style and length.


Journal Reference:

  1. Jaeha Lee, Jinhoo Kim, Charles E. Bakis, Thomas E. Boothby. Durability assessment of FRP-concrete bond after sustained load for up to thirteen years. Composites Part B: Engineering, 2021; 224: 109180 DOI: 10.1016/j.compositesb.2021.109180

Cite This Page:

National Korea Maritime and Ocean University. "How long can fiber reinforced polymer sustain concrete structures? Scientists answer." ScienceDaily. ScienceDaily, 14 October 2021. <www.sciencedaily.com/releases/2021/10/211014172723.htm>.
National Korea Maritime and Ocean University. (2021, October 14). How long can fiber reinforced polymer sustain concrete structures? Scientists answer. ScienceDaily. Retrieved March 28, 2024 from www.sciencedaily.com/releases/2021/10/211014172723.htm
National Korea Maritime and Ocean University. "How long can fiber reinforced polymer sustain concrete structures? Scientists answer." ScienceDaily. www.sciencedaily.com/releases/2021/10/211014172723.htm (accessed March 28, 2024).

Explore More

from ScienceDaily

RELATED STORIES